WHY CHOOSE AN AT212 TOP?
The light weight, power and efficiency of the AT212 make it ideal for providers who want to deliver high output but prefer not to move heavy cabinets.
Intended for use with a subwoofer system to complete a 3-way active full-range system. The AT212 has a tall, slim design allows the HF horn to stand above crowds when the cabinet is stacked on subwoofers and the light weight of the cabinet makes stacking easy for one person. One-man set up of a substantial system is made easy because the AT212 cabinets weigh only 89 lbs.
The advantages offered by BASSBOSS tops are their coherence, accuracy, dynamic resolution and robust reliability. These tops are designed to integrate with the BASSBOSS subwoofers to create accurate, dynamic and coherent systems that work together to ensure the best possible results from top to bottom.
No need to hold back!
BASSBOSS Tops and MicroMains are optimized and protected for safe, high-power operation.
All BASSBOSS loudspeakers are complete systems. Optimized cabinet design, premium quality drivers, power-matched amplification and comprehensive processing ensure that no matter the demand, they keep their cool, keep their character and keep on working.
The AT212 is a 2-Way active, powered and processed mid-high loudspeaker.
At only 89 lbs it is particularly well suited to applications where light weight is required. One-person set-up of a substantial system is easy and quick.
The cabinet is built of 15mm Baltic Birch plywood. It features an 18mm baffle, with dado joinery, 4 steel bar handles, and a 15 degree side angle trapezoid shape. The cabinet features 5 handles and 8 fly points, with 80 x 60 degree rotatable coverage for multiple applications including ground stack and horizontal or verticle flying.
Weatherized versions are available for outdoor installations. Rack-mounted amplification and waterproof input connections along with a fiberglass underlayed finish, silicone sealed gaskets, stainless steel grill and hardware and a hydrophobic grill cloth are optional.
The AT212 cabinets can be combined in arrays of 3 or more cabinets. The horn can be rotated and the boxes packed side-by-side to form arrays that cover 90, 120, 150, 180 degrees and more.
BASSBOSS cabinets are hand-built in the USA. Constructed from 15mm Baltic Birch plywood, using dado joints, screws and advanced composite adhesives.
Created to stand up to intense usage.
The cabinet is finished in an extremely rugged, black polyurethane coating. Drivers are protected by a black powdercoated, perforated steel grill, and the amp is recessed into the back of the cabinet for protection from damage, direct sun and moisture.
The amplifier consists of 2 channels with a total of 3,000W.
The amplifier features extremely high dynamic power capacity, with 150 Volts peak output per channel, along with high damping of >10000:1 Efficient, PFC power supply and class D output topology.
Exceptional dynamic resolution and detail along with precise control. It offers low current draw and light weight relative to the output capacity.
All the processing necessary for linear frequency response and phase coherent operation are pre-programmed into the DSP. With the comprehensive processing built in, BASSBOSS loudspeakers provide the ease of plug-and-play operation and the peace of mind that comes from knowing that the multiple limiter systems make to system virtually indestructible.
The AT212 vented cabinet features 2 x 12″ mid-bass drivers and a 1.4″ throat horn-loaded compression driver. The low-frequency section features a pair of 12″ woofers in a vented enclosure. The woofers feature cast aluminum baskets, neodymium motors and 4″ diameter voice coils. The high-frequency section features a 2.5″ voice coil, 1.4″ exit compression driver loaded on an 80 degree by 60 degree cast aluminum horn.
All the drivers feature Neodymium motor structures for the highest efficiency to weight ratio. The LF drivers have 4″ voice coils and the 1.4″ exit compression driver has a 2.5″ voice coil. The woofer coils are copper whereas the compression driver voice coil is aluminum. High-intensity Neodymium magnets are lighter and provide higher efficiency so the result is a lighter and louder cabinet.
The cones are waterproofed to protect them from possible, accidental exposure to moisture such as rain or spilled beverages. Waterproofed woofer cones also permit the cleaning of drivers that have been soiled in a dirty or dusty environment with the use of a damp cloth. Keep the amplifiers dry and party on!
Waterproofed cones in all products. Optional weatherized and weather resistant loudspeakers have the same acoustical performance as our standard options. If your system is likely to be exposed to rain, ask about IP rated amplification options. If you have need of a system for outdoor installation, ask about Weatherized products.
BASSBOSS speakers can be connected directly to your mixer with nothing but signal cable in between. The built-in processing is comprehensive and includes all necessary high-pass and low-pass filters along with equalization and phase alignment processing to ensure coherent response when deployed with BASSBOSS subwoofers.
There is no need for any additional EQ in the signal path for the speaker to provide a broad, flat frequency response. Sophisticated DSP programming ensures the speakers deliver consistent sound quality no matter the input level.
Plug-and play with peace of mind. Multiple, sophisticated protection systems make the loudspeaker virtually indestructible. You can turn on and turn up, all night, without fear of over-driving to the point of damage.
BASSBOSS technical specs are based upon measurements of continuous performance capabilities in normal usage. Other manufacturers may specify output based on calculations rather than measurements; measurements outside the operating bandwidth; or on ‘Burst’ or ‘Peak’ readings.
BASSBOSS specifications are conservative compared to most manufacturers. They reflect what the products will achieve, consistently, in the real world. Since the real world is where you’ll be using your gear.
- Frequency response (+-3 dB): 100 Hz - 18 kHz
- Maximum sustained output: 128 dB
- Short-term peak output: 134 dB
- Nominal Dispersion (°H x °V): 80 x 60, rotatable to 60 x 80
- Amplification: 1500-Watt two channel powersoft class D
- Processing comprehensive including high-pass, low-pass, parametric EQ, phase alignment and limiting.
- Electrical connectors: Neutrik PowerCON in and through
- Voltage operating range: 90-250V. Auto-sensing, auto switching universal supply
- Current draw, nominal: 3.6A @120V, 2.2A @240V
- Signal input connector: XLR-F
- Signal output connector: xlR-M pass-through only
- Enclosure type: 2-way mid-high. direct radiating vented LF section, horn-loaded HF section
- Transducers LF: 2 x 12" diameter (300 mm) neodymium motor woofer with 3" (76 mm) voice coils, waterproof cones
- Transducer HF: 1 x 1.4" exit, 3" (76 mm) diameter voice coil compression driver mounted to an 80° by 60° constant directivity horn
- Cabinet construction: 15mm baltic birch plywood, 18mm baffle, dado joinery, 4 steel bar handles, 15° side angle trapezoid
- Exterior finish touring: weatherproof bonded high-pressure polyurethane
- Exterior finish installation: textured epoxy paint
- Exterior finish weatherized fiberglass underlayed UV treated bonded high-pressure polyurethane with silicone seals and stainless steel grill
- Grill: black perforated, powder-coated steel
- Dimensions: 47.75" x 14.3" x 17.75" (HxWxD)
- Weight: 79 lbs.