Product was successfully added to your shopping cart.
(888) 527-0506CONTACT US

You have no items in your shopping cart.

ZV28 ZV28 ZV28 ZV28 ZV28 ZV28 ZV28 ZV28 ZV28 ZV28 ZV28 ZV28 ZV28 ZV28

BassBoss ZV28 Profundo Powered Subwoofer

Be the first to review this product

Quick Overview

Dual 18-Inch Powered Subwoofer


Availability: In stock

  • Details


     Unparalleled, swimming-in-it deep, deep bass.

    Experience full, rich sound that redefines what music can feel like. The ZV28 makes modern dance music come alive by faithfully reproducing the very low frequency material that is not heard with other subs.

    ZV28s were independently measured at Ultra Music Fest 2013 by Doug Fowler of ProSoundNews to achieve flat frequency response to 21Hz (-3 dB) at audience distance. Doug wrote in his article:

    “This thing…will blur your vision and modulate your voice, no problem… This thing is sick.”

    BASSBOSS subs are optimized for full-power usage.

    Multiple proprietary protection technologies ensure that the woofers remain within their excursion and thermal limits, so they don't break or burn like other subs. BASSBOSS provides much higher levels of deep bass than mass-market subs, reliably.

    With plenty of headroom to keep up with the most enthusiastic crowd and not run out of bass.

    The ZV28 is a vented, direct radiating dual 18″ subwoofer with a large internal volume, extensive bracing and a very low tuned frequency. Anti-standing wave baffles and pass-through dampers minimize upper resonances. Very large ports maximize low frequency performance at high output.

    For larger events, several arraying options are available. Block arrays, side-by-side arrays and front/back Cardioid arrays can be deployed securely thanks to the interlocking feet. Presets are accessed in the DSP.

    BASSBOSS cabinets are hand-built in the USA. They are constructed from 18mm Baltic Birch plywood, using dado joints, screws and advanced composite adhesives.

    Created to stand up to intense usage. The cabinet is finished in an extremely rugged, black polyurethane coating. Drivers are protected by a black powdercoated, perforated steel grill. The amp is recessed in the back of the cabinet to protect it from damage, direct sun or moisture.

    A 4000W RMS amplifier with integrated, comprehensive DSP is included. The amplifier is rated for RMS output using continuous sine wave signal.

    This is not a Peak or Burst power rating. BASSBOSS uses only continuous RMS power ratings because you’re not going to be using your sub in millisecond bursts. For subwoofer applications, Peak and Burst power ratings are largely irrelevant.

    Capable of delivering 4000W of continuous output. This ensures the amplifier isn’t the limiting factor in the output of low frequencies. Providing abundant power prevents overheating issues. It virtually eliminates the damage that clipping an amp that’s too small can cause.

    All that electrical power is converted into acoustical power by a pair of 18″ neodymium motor woofers. These premium-quality, drivers feature split-wound 4.5″ copper voice coils, and peak-to-peak excursion capability of up to 60mm.

    High-intensity Neodymium magnets are lighter and provide higher efficiency so the result is a lighter and louder cabinet. Split-wound coils produce a more linear force through the range of movement of the cone, which results in lower distortion and improved linearity at high output.

    The cones are waterproofed to protect them from possible, accidental exposure to moisture such as rain or spilled beverages. Waterproofed woofer cones also permit the cleaning of drivers that have been soiled in a dirty or dusty environment with the use of a damp cloth. Keep the amplifiers dry and party on!

    Waterproofed cones in all products. Optional weatherized and weather resistant loudspeakers have the same acoustical performance as our standard options. If your system is likely to be exposed to rain, ask about IP rated amplification options. If you have need of a system for outdoor installation, ask about Weatherized products.

    BASSBOSS subs can be connected directly to your mixer with nothing but signal cable in between. The built-in processing is comprehensive and yet minimal manipulation is applied to the signal. The processing includes only a high pass filter and a low-pass filter. There is no need for any EQ in the signal for the speaker to provide a broad, flat frequency response. A sophisticated limiter system protects the woofer from thermal and over-excursion damage.

    Plug-and play with peace of mind. Multiple, sophisticated protection systems make the loudspeaker virtually indestructible. You can turn on and turn up, all night, without fear of over-driving to the point of damage.

    BASSBOSS technical specs are based upon measurements of continuous performance capabilities in normal usage. Other manufacturers may specify output based on calculations rather than measurements; measurements outside the operating bandwidth; or on ‘Burst’ or ‘Peak’ readings.

    BASSBOSS specifications are conservative compared to most manufacturers. They reflect what the products will achieve, consistently, in the real world. Since the real world is where you’ll be using your gear.

    • Loudspeaker
      • Frequency response: (+-3 dB) 25 - 90 Hz
      • Frequency response, Pair: (+-3 dB) 21 - 90 Hz
      • Maximum sustained output: 134 dB SPL, 1 meter, half-space (ground plane)
      • Short-term peak output: 137 dB
      • Nominal dispersion (°H x °V): 360 x 360
    • Power
      • Amplification: 4000-watt continuous RMS Class D Aamplifier
      • Processing: Integrated comprehensive DSP provides high pass, low pass, phase alignment and limiting
      • Electrical connectors, Amplifier: Neutrik Powercon input (Blue) NAC3FCA
      • Electrical connector, mains: standard US 3-pin 120V electrical plug: NEMA 5-15.(Edison) Optional electrical plugs available, including L5-30 and others, upon request
      • Voltage operating Range: 90-130V
      • Current draw, nominal: 4.7A @ 120 volts, (typical, 1/8 max power)
      • Current draw, peak: 20A
      • Signal input connector: XLR-F
      • Signal output connector: XLR-M pass-through only
    • Physical
      • Enclosure type: Helmholz resonator enclosure, optimally tuned for extremely low frequency response with good sensitivity and high power handling
      • Transducers: 2 - 18" diameter (457 mm) woofer with 4.5" (115 mm) copper winding voice coil and 56 mm peak to peak excursion. Waterproof fiber composite cone
      • Cabinet Construction: 18 mm Baltic Birch plywood, extensively braced. Equipped with 16 flypoints; 2 pole sockets; 4 steel handles; 4 large rubber feet; 4 interlocking foot pockets
      • Dimensions (HxWxD): 22.5" x 42" x 42" (23.25" high with feet)
      • Net weight:220 lbs.
      • Shipping weight: 240 lbs.
      • Exterior finish: Weatherproof bonded high-pressure polyurethane
      • Grill: Black perforated, powder-coated steel
    • Options
      • Suspension system: 16 - 3/8-16 threaded flypoints
      • Installation Vversion: Available without handles and pole sockets
      • Amplification for installation: Complete power package including DSP in two rack space chassis
      • Transport Dollies: Wheel cart with 4 locking casters and recesses to accept interlocking cabinet feet for transporting 1 to 3 cabinets
      • Covers: Heavy-duty padded nylon transport covers for 1 to 2 cabinets

    Additional Information

    Free Shipping No

    Product Tags

    Use spaces to separate tags. Use single quotes (') for phrases.

    1. Be the first to review this product

    Write Your Own Review

    Need it now? Low on funds? You can get it right now with one of our Easy Payment Option available at check out!!!

    Also Purchased

    Comodo SSL